🔷 GLASS SPLASHBACK DESIGNER
6mm Toughened Glass · Fabrication Drawing
DIMENSIONS ▼
Enter the width and height of the panel.
→ All four widths set to this value
→ All four heights set to this value
PP / GPO CUTOUTS ▼
Click any cutout on the drawing to edit it.
COLOUR / MATERIAL ▼
Standard
Grey Tinted
Bronze Tinted
OVERALL DIMENSIONS ▼
Nominal cut dimensions. The drawing dimension lines update automatically when runouts are entered.
RUNOUTS — 8 POINT ▼
Each edge has two runout points — one at each end.
Left/right edges: runout is horizontal (±X).
Top/bottom edges: runout is vertical (±Y).
+ = corner moves outward (away from panel centre).
− = corner moves inward (toward panel centre).
Dimension lines update to show the actual measured size.
Left/right edges: runout is horizontal (±X).
Top/bottom edges: runout is vertical (±Y).
+ = corner moves outward (away from panel centre).
− = corner moves inward (toward panel centre).
Dimension lines update to show the actual measured size.
0
↑ TOP EDGE ↑
0
0
GLASS
PANEL
PANEL
0
0
0
0
↓ BOT EDGE ↓
0
CORNER OPTIONS ▼
Show square corner markers
A corner shows a square marker only when both its runout measurements are 0.
PP / GPO CUTOUTS ▼
Click any cutout on the drawing to edit it.
COLOUR / MATERIAL ▼
Standard
Grey Tinted
Bronze Tinted
EXPORT ▼
Show PP/GPO dimension leaders on drawing
PNG at 3× resolution (~300 DPI for A3 print).
Fabrication Drawing
Cutout