Shower screensBathroom design

Getting a shower screen quote: the sizes and photos to send

DB Glass 5 min read

Frameless corner shower screen with chrome hinges and glass top rail beside a toilet and white vanity
Frameless, SilverA corner screen planned around the vanity and toilet

A clear enquiry gets a clear quote. A few rough sizes and the right photos show the layout, how the screen will be fixed and anything that could get in the way of a door, all before we measure on site. This guide explains what to send.

The sizes to measure

Rough sizes are enough for a quote. Measure in millimetres and do not worry about exact figures, because every screen is measured on site before the glass is made.

  • The width of each opening. Measure where the glass will go, from wall to wall, or from the wall to the end of the hob or nib wall. Take one measurement near the floor and another at about head height, as walls are rarely perfectly straight.
  • The return. For a corner shower, measure the side as well as the front.
  • The hob or nib wall. If the screen will sit on a hob or finish against a nib wall, note its width and height.
  • The bath. For an over bath screen, note the length and width of the bath, and where the taps and shower head sit.
  • The height. If you have a screen height in mind, include it.

The photos that help most

  • A wide photo from the bathroom door that shows the whole shower and what is around it.
  • Each wall where the glass will meet the tiles, including any niche or window close to the screen.
  • The base of the shower, so we can see whether there is a hob, a step or a level floor.
  • Anything near the door, such as a vanity, toilet, towel rail, bath or window that a door could hit.
  • Your tapware, close enough to see the finish, if you would like the hardware to match.
  • The existing screen, with a close photo of how it is fixed, if it is being replaced.

Photos taken in daylight or with the bathroom light on, and without the flash aimed straight at the glass or tiles, show the most detail.

Tell us how you want it to work

A few details help us recommend the right screen: the style you like (frameless or semi-frameless), whether you want a hinged, pivot or sliding door or no door at all, the glass, and the frame or hardware finish. If you are not sure yet, say so. Photos show which door will work best, and we can recommend a layout from there.

Include your suburb as well. We install across the Sunshine Coast and surrounds, and the suburb lets us confirm we can help.

If the bathroom is still being built or renovated, tell us what stage it has reached. A quote can be prepared from photos and rough sizes at any stage, but we do not measure until the tiling is complete, because the glass is made to fit the finished walls and floor.

What happens after you send it

  • We read your details and photos and we'll reach out with any questions.
  • You receive a written quote to review at your own pace before anything is ordered.
  • We measure on site. Every wall and floor is measured so the glass fits exactly, and the price is confirmed.
  • The glass is made to size, then fitted, sealed and checked to Australian Standards.

Why the final measure is done on site

Walls are rarely perfectly square or plumb, and shower floors are laid with falls towards the waste. Toughened glass cannot be cut, drilled or trimmed once it has been toughened, so every hole, notch and edge is finished before toughening, to measurements taken on site. Our guide to toughened glass explains why.

Send your enquiry

Get a quote and attach your photos and sizes. To understand what moves the price, read what affects the cost of a shower screen, and if the terms in a quote are unfamiliar, see our shower screen glossary.

Shower screen quote questions

Do I need exact measurements for a shower screen quote?

No. Rough sizes in millimetres and a few photos are enough for a quote. Every screen is measured on site before the glass is made, and the price is confirmed then.

Why is the glass not trimmed to fit on the day?

Toughened glass cannot be cut, drilled or trimmed after it has been toughened. Every hole, notch and edge is finished first, so the glass must be made to exact measurements taken on site.

Should I wait until the tiling is finished?

You can get a quote from photos and rough sizes at any stage. We do not measure until the tiling is complete, because the glass is made to fit the finished walls and floor.

Which photos are most useful?

A wide photo from the doorway, each wall where the glass will meet the tiles, the base of the shower, and anything near the door such as a vanity or toilet. If you are replacing a screen, add a close photo of how it is fixed.

Ready for your quote?

Send rough sizes, a few photos and your suburb, and we will come back with a written quote.