What is toughened glass?

Toughened glass, also called tempered glass, plays a crucial role in the safety of many products in homes and businesses. Shower screens, splashbacks, doors, windows and table tops all use it, and for good reason.
Here is what toughened glass is, how it is made, why it is useful, and what to know when choosing it for your home.
What exactly is toughened glass?
Toughened glass is heat treated to make it much stronger than ordinary glass. The glass is heated to around 600°C, then cooled rapidly with air. The quick cooling locks the outer surfaces into compression while the core stays in tension. That surface compression makes the glass up to five times stronger than ordinary glass and better able to withstand impacts and temperature changes.
The main benefit is safety. Ordinary glass can break into dangerous sharp shards. Toughened glass is designed to shatter into small, blunt granules. It can make a mess, but if it does break, the risk of injury is far lower.
Weak points of toughened glass
Toughened glass is known for its strength, but its corners are a weak point. The heating and rapid cooling create internal stresses that make the glass stronger overall, yet the corners remain more vulnerable. If they are not handled carefully they can chip or crack, causing the whole panel to shatter.
That is why toughened glass should be installed by a professional. A trained glazier fits the glass correctly, reducing the risk of damage and stress points, for a safe, long lasting installation.
Nickel sulphide inclusions
Nickel sulphide is a rare impurity that can form in glass during manufacture, when small traces of nickel and sulphur react. In toughened glass the inclusion can slowly expand over time and may cause the panel to break. It is rare, and modern manufacturing has greatly reduced the risk. Choosing glass from reputable Australian suppliers gives you assurance of quality.
Imported vs Australian made glass
Imported and Australian made toughened glass can both meet the required safety standards, but there are important differences.
- Quality control. Australian glass is made under strict quality control and must meet the National Construction Code (NCC). Imported glass can meet these standards, but quality assurance may not be as consistent.
- Environmental impact. Australian made glass supports local industry and avoids the carbon footprint of international shipping.
- Made to fit. Australian manufacturers make glass to your exact needs. Imported glass comes in standard sizes with square corners, which is limiting, because most bathrooms are not perfectly square. Walls lean and tiles are laid with falls. Custom made glass fits those imperfections for a better installation.
Caring for toughened glass
Toughened glass is very strong, but it still needs the right care, especially in a shower screen.
- Clean regularly. Use a squeegee after each shower to remove water and prevent mineral build-up.
- Avoid abrasive cleaners. Harsh scrubbers and cleaners can scratch the surface and weaken the glass.
- Check the installation. Make sure no part of the glass rubs against another surface, as this can damage it.
Final thoughts
Toughened glass is a safe, reliable material that plays a key role in daily life. When choosing glass for your home, choose quality local glass and have it installed by a professional. All DB Glass screens use toughened safety glass to AS/NZS 2208, installed to AS 1288.
Toughened glass questions
Can toughened glass be cut or altered after it has been made?
No. Toughened glass cannot be cut, drilled or altered once it has been toughened. Any changes must be made before toughening, and trying to cut it afterwards will make it shatter. The edges can be lightly polished if needed, but only to a minimal extent.
How do I know if my glass is toughened?
Toughened glass usually has a small etched compliance stamp in one corner, showing it meets safety standards. If you are unsure, a glazier can check for you. You can also look at it through polarised sunglasses: toughened glass often shows dark spots, wavy lines or rainbow-like patterns. These come from the internal stresses created during toughening and are not visible to the naked eye.
Is toughened glass unbreakable?
No. It is much stronger than ordinary glass, but not indestructible. A hard impact, especially on the edges or corners, can still break it.
What happens if toughened glass breaks?
Unlike ordinary glass, which breaks into sharp, hazardous shards, toughened glass shatters into small, blunt granules. This greatly reduces the risk of injury. It can make a mess, but it generally prevents serious harm to anyone nearby.
What is the difference between toughened and laminated glass?
Toughened glass is heat treated for strength and breaks into small granules. Laminated glass is two layers bonded with a plastic interlayer, which holds the glass together even when it cracks.
Can toughened glass break by itself?
Yes, but it is rare. It can happen because of a nickel sulphide inclusion, edge damage or extreme stress. Choosing high quality glass from reputable suppliers reduces the risk.
Keep reading

Shower glass delamination: what it is and why replacement is best
Cloudy edges or dark marks trapped inside the glass? Learn how delamination happens, why repairs are risky and why full replacement is best.
Read the article
Clear vs low iron glass: what is the difference?
From shower screens to splashbacks, understanding the clarity, tint and best uses of each glass helps you choose well.
Read the article
Frameless vs semi-frameless shower screens
Explore the key differences in cost, design and function to find the shower screen that suits your bathroom.
Read the articleRelated products
Shower screens
Frameless and semi-frameless styles compared side by side.
Glass options
Clear, low iron, acid etched, narrow reed and grey tint compared.
Glass splashbacks
Painted glass splashbacks in any Dulux colour, cut to size.
Safety glass, made to measure
Every screen is toughened to AS/NZS 2208 and installed to AS 1288. Tell us about your project.
