Care and safetyShower screens

How to clean a shower screen and keep it clear

DB Glass 5 min read

Frameless shower screen with brushed brass hinges beside a backlit arched mirror and timber vanity
Frameless, Brushed BrassFewer frames and channels leave fewer places for soap and grime to collect

A glass shower screen is easy to keep clear once you know what to use and what to avoid. A few simple habits stop water spots and soap scum building up, and protect the frame and hardware so the screen keeps working smoothly for years.

Squeegee after every shower

The most effective habit is also the quickest. Running a squeegee down the glass straight after a shower removes most of the water before it dries. Water spots are the minerals left behind when droplets evaporate, so taking the water off the glass stops them forming in the first place.

Keep a squeegee in the shower where it is easy to reach. Work from the top down, overlap each stroke and wipe the blade as you go. It takes less than a minute and does more to keep the glass clear than any cleaning product.

A regular clean: what to use

Clean the screen about once a week, or more often in a busy family bathroom. Use a soft microfibre cloth or a non-scratch sponge with a gentle cleaner. Any of these works well:

  • Warm water with a little dishwashing liquid
  • White vinegar diluted with water
  • Methylated spirits on a cloth
  • A reputable ammonia-free glass cleaner

Do not leave cleaners sitting on the glass. Rinse the screen thoroughly with clean water, then dry it with a soft cloth so no water spots are left behind.

What to avoid

Some common cleaning products do more harm than good on a shower screen.

  • Bleach and ammonia. They can damage the finish and corrode frames and hardware.
  • Scourers, steel wool and metal scrapers. They can scratch the glass and the frame finish.
  • Lubricants and oils. Never use them on frameless hardware. The glass is held by clamp fittings, and lubricants can dissolve the rubber gaskets or let the glass slip.
  • Acidic cleaners left to sit. Rinse off vinegar and other acidic cleaners promptly, especially near aluminium frames.

Soap scum and hard water marks

If marks have built up, diluted vinegar or methylated spirits will usually lift them. Apply it with a microfibre cloth, work over the marked area, then rinse and dry. For stubborn build-up, a melamine sponge works well, but it is mildly abrasive, so use it gently and not as an everyday cleaner.

Once the glass is clear again, a squeegee after each shower keeps it that way.

Caring for the frame and hardware

The aluminium frames on semi-frameless screens do not rust, but acidic cleaners can cause corrosion and pitting if they are left on the surface. Clean the frame regularly so soap scum does not build up along the edges and in the corners, and rinse it well afterwards.

On frameless screens, wipe the hinges, clamps and handle with a soft cloth and mild soapy water, then dry them. Never apply oil or lubricant to frameless hardware.

On sliding screens, keep the track and sill clear of hair, soap and grit so the rollers run smoothly. A soft brush and a damp cloth are all you need.

Frosted and patterned glass

Acid etched glass has a soft, frosted surface that can show marks more easily on the treated side. Clean it with a soft cloth and mild soapy water, then rinse and dry. On fluted and patterned glass, work the cloth along the pattern so soap does not collect in the texture.

Keep the bathroom ventilated

Moist air that lingers after a shower lets mould take hold on seals, silicone and grout. Run the exhaust fan or open a window during and after showering, and leave the shower door open for a while so the enclosure can dry out.

When cleaning is not enough

Some marks cannot be cleaned away. If the glass looks cloudy from the edges, or has brown or black marks that sit inside the glass rather than on the surface, it may be delamination, which affects older laminated shower glass. Our article on shower glass delamination explains the signs and why replacement is the best fix. If water is getting out onto the bathroom floor, see why a shower screen leaks.

If your screen is past its best, a new screen in toughened safety glass is made to measure for your shower. Get a quote with a few photos.

Shower screen cleaning questions

What is the best way to clean a glass shower screen?

Squeegee the glass after every shower, then clean it about once a week with a microfibre cloth and a gentle cleaner such as dishwashing liquid in warm water, diluted vinegar, methylated spirits or a reputable ammonia-free glass cleaner. Rinse thoroughly and dry with a soft cloth.

Can I use bleach on my shower screen?

No. Bleach and ammonia can damage the finish and corrode frames and hardware. For everyday cleaning, a gentle, non-abrasive cleaner is all a shower screen needs.

How do I stop water spots on shower glass?

Water spots are minerals left behind as water dries. Running a squeegee over the glass straight after each shower removes the water before it can dry, which stops most spots forming.

Should I oil the hinges or rollers?

No. Frameless hardware relies on clamp fittings, and lubricants can dissolve the rubber gaskets or let the glass slip. Keep hinges and rollers clean and dry instead, and keep sliding tracks clear of hair and grit.

Is vinegar safe to use on a shower screen?

Diluted white vinegar works well on glass, but rinse it off promptly. Acidic cleaners left sitting on aluminium frames can cause corrosion and pitting.

Ready for a new shower screen?

Request a quote for any style.